First, if the motor is not used for a long time, it should be placed in a monotonous and ventilated indoor environment. And the indoor environment is relatively clean, no metal dust, no acid fog, salt fog, etc.
When storing, pay attention to keep the motor covered with oil / water-proof material.
2. When the motor is not used for a long time, the following measures should be taken:
1. The motor shall be maintained once, dust and oil stain shall be removed, and insulation of three-phase winding shall be measured and recorded;
2. The storage environment of the motor should adhere to the monotonous air circulation, there should be no water on the ground, and wood blocks and other things should be filled at the motor accumulation place; the motor should not be placed together with chemicals, such as acid, alkali, battery, etc., the motor should be stacked one meter away from the wall, the shaft extension end of the motor should be coated with antirust oil, and the motor should be concealed with plastic cloth, and the motor should be kept flat when placed Put it.
Article source: Jiangmen motor wholesale http://www.candid-video.com
07-06
The difference between reducer and gearbox
Reducer motor mainly refers to the gear motor assembled by gear box and motor. Its main function is to increase the torque and reduce the speed. It is widely used in many factories. It is generally decelerated by means of gearbox. Reducer motor refers to the integration of reducer and motor (motor), which can also be called gear motor or gear motor. It is usually integrated and assembled by a professional reducer manufacturer and integrated with the motor. The reducer motor is a kind of power tr
07-06
What is the difference between asynchronous motor and synchronous motor?
The principle of asynchronous and synchronous motors are both based on the law of electromagnetic induction. The difference is that the symmetrical three-phase windings of the asynchronous motor are connected to the AC power supply. Even if the stator does not roll, a rotating magnetic field will occur because of the AC power supply. At this moment, the current will occur in the closed winding circuit. Therefore, according to the left-hand screw rule, the effect of the force on the current carry